EM4597 My modem/router doesn't have a WPS button or the repeater couldn't get connected by WPS.

Ez a cikk nem érhető el az Ön nyelvén. Az eredeti forrásnyelv az alábbiakban látható.

Manual configuration using encryption key

1. Connect the EM4597 to a wall outlet (preferably close to the modem/router).
2. Wait for the signal indicator to flash green. This will take approximately 1 minute.
3. Connect to the EM4597 via Wi-Fi SSID: Eminent_repeater or Eminent_repeater(5G), or use the Ethernet cable to connect directly from your PC LAN port to the EM4597 “LAN” port
4. Open your internet browser and type in your internet browser and then hit Enter.
5. The login screen will appear. Enter the Username: “admin” and Password: “admin”, then click “Login” to login.


6. In the next step you will need to enter the WEP or WPA Passphrase of the Wi-Fi network you wish to connect to.

Select “Repeater Wizard” from the menu.


7. You will see a screen with all the available Wi-Fi networks ( 2.4GHz and 5GHz bands ).


8. Select the corresponding network you want to connect to in the “Choose” field.
9. You may notice that the repeater will automatically make a new Wi-Fi SSID name for 2,4GHz and 5GHz SSID. Enter the security key of your wireless network in the Wi-Fi “Key” field.



10. Click “Save”, the EM4597 will reboot and connect to your router.

11. You can now connect your wireless network adapter(s) to the new made Wi-Fi SSID and entering the wireless encryption key of the wireless network you previously connected.

Note: After the settings have been applied, the EM4597 will reboot. Your device will no longer be connected to the wireless network SSID of the EM4597.

Hasznos volt ez a cikk?
16/8 szavazó hasznosnak találta ezt
Kérés benyújtás