EM6355 The webpage of the camera, Advanced Settings, E-mail

Ez a cikk nem érhető el az Ön nyelvén. Az eredeti forrásnyelv az alábbiakban látható.

Set the settings for an e-mail server to be able to send e-mails on an alarm event.

Please note ! : Some mail providers for example Gmail and Yahoo require additional settings to be set within the account to be able to send e-mails from a Third-Party device like a IP-camera. Please find the instructions for Gmail and Yahoo below.

SMTP settings for Gmail:

SMTP Server: smtp.gmail.com
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Gmail email address
Password: Enter your password for your Gmail email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Gmail email address

Additional settings Gmail:

• Open Gmail using your webbrowser.
• Login to your Gmail account.
• Go to your Gmail settings by clicking EM63XX_config_button.png and select “Settings”.

EM63XX_camera_instellingen_geavanceerd_mail_instellingen_3_gmail_1.png

• Click "Accounts and import".
• Click "Other Google Account settings".

EM63XX_camera_instellingen_geavanceerd_mail_instellingen_3_gmail_2.png

• Click "Connected apps & sites"

• Turn on the option "Allow less secure apps:".

Now you can use Gmail on your CamLine Pro camera.

SMTP settings for Outlook:

SMTP Server: smtp-mail.outlook.com
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Outlook email address
Password: Enter your password for your Outlook email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Outlook email address.

SMTP settings for Yahoo:

SMTP Server: smtp.mail.yahoo.com
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Yahoo email address
Password: Enter your password for your Yahoo email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Yahoo email address.

Additional settings Yahoo:

• Open Yahoo using your webbrowser.
• Login to your Yahoo account.
• Click on your account EM63XX_camera_instellingen_geavanceerd_mail_instellingen_4_yahoo_1.png and select “Account Info”.

EM63XX_camera_instellingen_geavanceerd_mail_instellingen_4_yahoo_2.png

• Select “Account security
• Enable the option “Allow apps that use less secure sign in

EM63XX_camera_instellingen_geavanceerd_mail_instellingen_4_yahoo_3.png

Now you can use Yahoo on your CamLine Pro camera.

SMTP settings for Ziggo:

SMTP Server: smtp.ziggo.nl
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Ziggo email address
Password: Enter your password for your Ziggo email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Ziggo email address.

SMTP settings for Telfort:

SMTP Server: smtp.telfort.nl
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Telfort email address
Password: Enter your password for your Telfort email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Telfort email address.

SMTP settings for Proximus/Skynet/Belgacom:

SMTP Server: relay.proximus.be
Port: 587
Protocol: STARTTLS
SMTP server requires authentication: Yes
Username: Enter your Proximus/Skynet/Belgacom email address
Password: Enter your password for your Proximus/Skynet/Belgacom email address
Send to: Enter the email address the camera should send the e-mail to (max. 3 E-mail addresses possible.
Sender address: Enter your Proximus/Skynet/Belgacom email address. 

Change the amount of snapshots that is send by e-mail:

It is possible to set the amount of snapshots to be attached in 1 e-mail you can choose from the following amount of snapshots 1, 2 or 3.

You are only able to set the amount using the web browser NOT by using the APP.

Below you will find the steps to adjust the settings:

  • First we have to find the IP address of the IP camera. If you do not know the IP address of the camera, you can find it via the CamLine Pro PC software.
  • Start the CamLine Pro PC software and click on the + icon next click on “LAN search". The camera can be located by its ID number as noticed on the ID-card. Double click with the left mouse button on the camera ID number and an Internet browser will open automatically.
  • In the address bar of the browser, you will see for example the IP-address: https://192.168.8.10:443 :443 = port number and is applicable in case you have installed the most recent Firmware for your camera. In case you not seeing a login screen after the Internet browser has been opened, then the camera does not have the most recent Firmware version installed and is port :81 applicable. Change port: 443 into 81 e.g. https://192.168.8.10:81 and press “Enter” in order to reload the page.
  • The login screen will appear now, the default user name = admin and the password you are able to retrieve from the ID-card (4 cipher digits) you received along with the camera. After a reset or Firmware update the default password will be hereafter: ipcam
  • You are able to change the default password or in the CamLine Pro App or through the IP-address (as described above) at “Advanced Settings” and finally at “User Accounts”.
  • After signing in; click on "Sign in" (for IE, Firefox etc.).
  • Click on "Options" EM63XX_config_button.png.

EM63XX_camera_instellingen_geavanceerd_mail_instellingen_5_aantal_snapshots_per_mail.png

  • From the menu select “Alarm Settings
  • Change the number of snapshots behind the option "Image capture number:" to the amount preferred
  • Press "OK"
Hasznos volt ez a cikk?
0 számú 0 számúból hasznosnak találta ezt
Kérés benyújtás