EM6325 The webpage of the camera, Alarm settings , Enable/Change Motion detection settings

Tämä artikkeli ei ole käytettävissä kielelläsi. Alkuperäinen lähdekieli on näytetty alla.

In this setup menu you can determine what should happen if an alarm event is triggered.

Enable/Change Motion detection settings:

Enable and set the sensitivity to trigger an alarm event based on motion.

Important ! : It is possible, if you have the sensitivity of the motion detector too high, that you get false alarms as a result. Reduce the sensitivity try again.

Important ! : To set and enable the motion detect settings please make sure you have installed Adobe Flash player for your browser (to install the latest Flash player version go to https://get.adobe.com/flashplayer/.

Important ! : If you use the camera in combination with the EM6304 NVR, then the motion detection must be switched on in order to use this function on the EM6304.

Oliko tämä artikkeli hyödyllinen?
0/0 koki tästä olevan apua
Lähetä pyyntö