EM6330 The webpage of the camera, Alarm settings , Enable/Change Motion detection settings

Este artículo no está disponible en su idioma. El idioma fuente original se muestra a continuación.

In this setup menu you can determine what should happen if an alarm event is triggered.

Enable/Change Motion detection settings:

Enable and set the sensitivity to trigger an alarm event based on motion.

Important ! : It is possible, if you have the sensitivity of the motion detector too high, that you get false alarms as a result. Reduce the sensitivity try again.

Important ! : To set and enable the motion detect settings please make sure you have installed Adobe Flash player for your browser (to install the latest Flash player version go to https://get.adobe.com/flashplayer/.

Important ! : If you use the camera in combination with the EM6304 NVR, then the motion detection must be switched on in order to use this function on the EM6304.

¿Fue útil este artículo?
Usuarios a los que les pareció útil: 0 de 0
Presentar una solicitud