Este artículo no está disponible en su idioma. El idioma fuente original se muestra a continuación.
In this setup menu you can determine what should happen if an alarm event is triggered.
Enable/Change Motion detection settings:
Enable and set the sensitivity to trigger an alarm event based on motion.
Important ! : It is possible, if you have the sensitivity of the motion detector too high, that you get false alarms as a result. Reduce the sensitivity try again.
Important ! : To set and enable the motion detect settings please make sure you have installed Adobe Flash player for your browser (to install the latest Flash player version go to https://get.adobe.com/flashplayer/.
Important ! : If you use the camera in combination with the EM6304 NVR, then the motion detection must be switched on in order to use this function on the EM6304.