EM6330 The webpage of the camera, Advanced Settings, PTZ Protocol

Here you can change the following settings for the PTZ Protocol :

  • Cruise laps: The number of cycles that the camera has to go through when the Cruise button is pressed.
  • PTZ Speed: The speed of the Pan / Tilt movement
  • Centered after Self Check: The camera will return to its center when the camera is restarted.
  • Activate Pan Tilt movement on alarm: When Pan / Tilt is used an alarm will be given or not.
Was this article helpful?
0 out of 0 found this helpful
Submit a request