EM6325 The webpage of the camera, Networking

  • Updated

Here you can change the network settings such as Automatic or Manual IP address (default set to Automatic), Use Automatic or Manually DNS server and change the default port settings for HTTP, RTSP, RTP, RTMP also you can enable or disable password protection for the RTSP video stream (default set to enabled and will use the same credentials as set in the user account settings).

Wireless settings

Scan and set your camera to connect to your WiFi connection (2,4 GHz only) 

In some cases you will notice the camera will not connect to the WiFi network as configured. If so please try to change the encryption from AES to TKIP or vice versa.

Remote access

If you wish to access your ca.mera using a Dynamic DNS server like for example DYNDNS or NO-IP you can enable and configure this feature here as also enable/disable UPnP port mapping

Onvif

Here you can change the Onvif settings (Open Network Video Integration Forum) 

The ONVIF specification defines a common protocol for the exchange of information between network video devices including: automatic device discovery, video streaming and intelligence metadata. 

The Preview option is to enable or disable a password when using the Onvif protocol. By default, this is enabled (user name and password correspond to the user settings of the camera).