EM6350 Adding the camera to a wireless network using the WiFi smart configuration

This function is only available when the camera is used for the first time or after a factory reset.  

  • Open the APP “CamLine Pro”.

 EM63XX_Camera_install_camline_2.png

  • Follow the instructions on the screen.

Note ! : Make sure your smartphone/tablet is connected to the same WiFi network as the WiFi you wish to connect the camera too (make sure this is a 2,4GHz WiFi network)

Note ! : The device will reboot if necessary followed by calibration of the camera.

Was this article helpful?
0 out of 0 found this helpful
Submit a request